Tidak ada produk di keranjang.
Atlas Scientific
Menampilkan 1–15 dari 38 hasil
- Ready StockProbe/Electrode
Atlas Scientific 3/8″ Flow Meter #Sen-206F
Our 3/8” male NPT turbine flow meters are compact, lightweight and allow for highly accurate and repeatable measurements during quick dispensing or metering cycles. This flow meter is intended for low flow ranges from 760 mL/min (0.2GPM) up to 7.6 L / min (4 GPM).
SKU: Sen-206F - Ready StockCarrier Board
Atlas Scientific Arduino Rapid Development Shield #ARDS
The Atlas Scientific Arduino Rapid Development Shield has been designed to make debugging and testing a snap for any embedded systems engineer who are working on an Arduino based device. Use the Rapid Development Shield with the FREE Atlas Desktop Software or the EZ-Com sample code. The Atlas Scientific Arduino Rapid Development Shield comes partially assembled, soldering is required.
SKU: ARDS - Ready StockConductivity Probe
Atlas Scientific Conductivity K 0.1 Kit #EC-KIT-0.1
If you are new to electrochemical sensing, knowing what components you need can get confusing. Let us help you. The Atlas Scientific K0.1 EZO-Conductivity Kit is perfect measuring water with a conductivity range from 0.07µs to 50,000µs. That means this kit is perfect for high purity water applications. And because the K0.1 kit can read well beyond the range of high purity water, you can trust that readings outside of the desired range will still be accurate.
SKU: EC-KIT-0.1 - Ready StockConductivity Probe
Atlas Scientific Conductivity K 1.0 Kit #EC-KIT-1.0
If you are new to electrochemical sensing, knowing what components you need can get confusing. Let us help you. The Atlas Scientific K1 EZO-Conductivity Kit is perfect measuring water with a conductivity range from 10µs to 100,000µs. That means this kit is perfect for environmental monitoring, hydroponics, and both freshwater and saltwater aquariums.
SKU: EC-KIT-1.0 - Ready StockConductivity Probe
Atlas Scientific Conductivity K 10 Kit #EC-KIT-10
If you are new to electrochemical sensing, knowing what components you need can get confusing. Let us help you. The Atlas Scientific K10 EZO-Conductivity Kit is perfect measuring water with a conductivity range from 70µs to 500,000+µs. This kit is perfect for saltwater and chemical process monitoring.
SKU: EC-KIT-10 - Ready Stock
- Ready StockCarrier Board
Atlas Scientific Electrically Isolated USB EZO Carrier Board #USB-ISO
Electrically Isolated USB EZO Carrier Board Allows you to connect your Atlas Scientific circuit directly to your computer or Raspberry Pi, using standard USB drivers (for an FTDI device). Built in isolation ensures that your circuit will be protected from interference, ground loops, and harmfull voltages.
SKU: USB-ISO - Ready StockEZO
Atlas Scientific EZO Conductivity Circuit #EZO-EC
From chemical production to hydroponics, conductivity is a fundamental measurement of water chemistry. The Atlas Scientific EZO-EC Circuit reads conductivity, salinity, and TDS (PPM). Embedding this module into your machine gives you access to the same accuracy and functionality found in costly bench-top conductivity meters. If you need accurate readings that you can rely on, the EZO-EC circuit is the drop-in solution you have been looking for.
SKU: EZO-EC - Ready StockEZO
Atlas Scientific EZO Embedded Flow Meter Totalizer #EZO-FLOW
Reading the signal from a flow meter is easy; until you actually try and do it. A few missed pulses here and there leads to massive inaccuracies over a relatively short time. To accurately read and totalize flow rate, a subsystem must be used that has been specifically designed to do just that (hint don’t use your CPU to totalize flow; it’s busy doing other things).
The EZO-Flow can be used with your own pulsed D.C. flow meter, or it can be connected to one of the flow meters we offer.
SKU: EZO-FLOW - Ready StockEZO
Atlas Scientific EZO ORP Circuit #EZO-pH
From water sterilization to chemical production, the reasons for needing to know the ORP of water are many. Fortunately, Atlas Scientifics EZO-ORP circuit makes taking high accuracy ORP readings easy. From calibration to timed readings, the Atlas Scientific EZO-ORP circuit is a drop-in solution to a complex measurement.
SKU: EZO-ORP - Ready StockEZO
Atlas Scientific EZO pH Circuit # EZO-pH
Although it is a common measurement, accurately reading pH is very difficult. Atlas Scientific’s EZO-pH circuit gives engineers the ability to read pH with the same accuracy and capabilities that were traditionally only found in expensive bench-top meters.
With an easy to use data protocol, simple command structure, and an easy to read datasheet engineers of any skill level will be able to add high accuracy pH readings to their next project quickly.
SKU: EZO-pH - Ready StockEZO
Atlas Scientific EZO RTD Temperature Circuit #EZO-RTD
There is no shortage of temperature probes out there, and the most accurate of all is the platinum RTD probe. But, converting the resistance of platinum to an actual temperature is unusually complicated. Fortunately, the Atlas Scientific EZO-RTD Circuit makes taking high accuracy readings from a platinum RTD probes easy. The EZO-RTD Circuit can work with any class of 2, 3, or 4 wire platinum RTD probes and has a sensing range of -126.000 °C to +1,254 °C.
SKU: EZO-RTD - Ready StockCarrier Board
Atlas Scientific Gen 2 Electrically Isolated USB EZO Carrier Board for pH DO ORP Conductivity EZO #G2-USB-ISO
Carrier BoardAtlas Scientific Gen 2 Electrically Isolated USB EZO Carrier Board for pH DO ORP Conductivity EZO #G2-USB-ISO
The Gen 2 Electrically Isolated USB EZO™ Carrier Board Allows you to connect your Atlas Scientific circuit directly to your computer or Raspberry Pi, using standard USB drivers (for an FTDI device). Built in isolation ensures that your circuit will be protected from interference, ground loops, and harmful voltages.
SKU: G2-USB-ISO - Ready StockConductivity Probe
Atlas Scientific Industrial Conductivity K 1.0 Kit #KIT-106E
Are you working with a PLC and aren’t sure what parts are right for you? Let us help you. This is the Atlas Scientific, Industrial Conductivity kit. It comes with everything you need to take high accuracy, interference-free readings with a PLC. The industrial strength conductivity probe is ready for the job, whatever it may be. This probe doesn’t care, from batch process chemical production to wastewater treatment. You can use it for anything. The DIN rail mount and wide operating voltage makes it easy to install. The 4-20mA data output and display makes it easy to read. And the simple calibration protocol gets you up and running in no time.
SKU: KIT-106E
