Tidak ada produk di keranjang.
EZO
Atlas Scientific EZO pH Circuit # EZO-pH
Availability:
Stok 5
Although it is a common measurement, accurately reading pH is very difficult. Atlas Scientific’s EZO-pH circuit gives engineers the ability to read pH with the same accuracy and capabilities that were traditionally only found in expensive bench-top meters.
With an easy to use data protocol, simple command structure, and an easy to read datasheet engineers of any skill level will be able to add high accuracy pH readings to their next project quickly.
Status Barang: Ready
Kondisi: Baru
Minimal Order: 1 pcs
Made in the USA
Part # EZO-pH
OVERVIEW:
Although it is a common measurement, accurately reading pH is very difficult. Atlas Scientific’s EZO-pH circuit gives engineers the ability to read pH with the same accuracy and capabilities that were traditionally only found in expensive bench-top meters.
With an easy to use data protocol, simple command structure, and an easy to read datasheet engineers of any skill level will be able to add high accuracy pH readings to their next project quickly.
SPECIFICATION:
◆ Reads: pH
◆ Range: .001 − 14.000
◆ Resolution: .001
◆ Accuracy: +/– 0.002
◆ Response time: 1 reading per sec
◆ Supported probes: Any type & brand
◆ Calibration: 1, 2, 3 point
◆ Temp. compensation: Yes
◆ Data protocol: UART & I2C
◆ Default I2C address: 99 (0x63)
◆ Operating voltage: 3.3V − 5V
◆ Data format: ASCII
EACH UNIT INCLUDES WITH:
◆ EZO pH Circuit only
| Berat | 0,1 kg |
|---|
Based on 0 reviews
Be the first to review “Atlas Scientific EZO pH Circuit # EZO-pH”
Produk Terkait
- Ready StockEZO
Atlas Scientific EZO Embedded Flow Meter Totalizer #EZO-FLOW
Reading the signal from a flow meter is easy; until you actually try and do it. A few missed pulses here and there leads to massive inaccuracies over a relatively short time. To accurately read and totalize flow rate, a subsystem must be used that has been specifically designed to do just that (hint don’t use your CPU to totalize flow; it’s busy doing other things).
The EZO-Flow can be used with your own pulsed D.C. flow meter, or it can be connected to one of the flow meters we offer.
SKU: EZO-FLOW - Ready StockEZO
Atlas Scientific EZO Conductivity Circuit #EZO-EC
From chemical production to hydroponics, conductivity is a fundamental measurement of water chemistry. The Atlas Scientific EZO-EC Circuit reads conductivity, salinity, and TDS (PPM). Embedding this module into your machine gives you access to the same accuracy and functionality found in costly bench-top conductivity meters. If you need accurate readings that you can rely on, the EZO-EC circuit is the drop-in solution you have been looking for.
SKU: EZO-EC - Ready StockEZO
Atlas Scientific EZO ORP Circuit #EZO-pH
From water sterilization to chemical production, the reasons for needing to know the ORP of water are many. Fortunately, Atlas Scientifics EZO-ORP circuit makes taking high accuracy ORP readings easy. From calibration to timed readings, the Atlas Scientific EZO-ORP circuit is a drop-in solution to a complex measurement.
SKU: EZO-ORP - Ready StockEZO
Atlas Scientific EZO RTD Temperature Circuit #EZO-RTD
There is no shortage of temperature probes out there, and the most accurate of all is the platinum RTD probe. But, converting the resistance of platinum to an actual temperature is unusually complicated. Fortunately, the Atlas Scientific EZO-RTD Circuit makes taking high accuracy readings from a platinum RTD probes easy. The EZO-RTD Circuit can work with any class of 2, 3, or 4 wire platinum RTD probes and has a sensing range of -126.000 °C to +1,254 °C.
SKU: EZO-RTD
There are no reviews yet.