Shop

Ready Stock
ORP Meter, pH Meter
Lutron BPH-231 – Bench pH/ORP Meter
ORP Meter, pH Meter
Lutron BPH-231 – Bench pH/ORP Meter
0 out of 5
(0)
The BPH-231 pH Meter offers accurate and reliable pH and ORP (Oxidation-Reduction Potential) measurements with advanced data logging and connectivity features, making it an essential tool for various laboratory and industrial applications.
SKU: L-BPH231
Rp4.411.000,0
Tambah ke keranjang

Compare
Compare
Ready Stock
Thermometer
Lutron BTM-4208SD – 12 Channels Temperature Recorder
Thermometer
Lutron BTM-4208SD – 12 Channels Temperature Recorder
0 out of 5
(0)
The BTM-4208SD Temperature Recorder provides accurate and reliable temperature measurements with real-time data logging capabilities, making it an essential tool for various industrial and laboratory applications.
SKU: L-BTM4208SD
Rp9.640.000,0
Tambah ke keranjang

Compare
Compare

Ready Stock

Air Quality Meter

Lutron BVB-8207SD – 4 channels Vibration Recorder

Air Quality Meter

Lutron BVB-8207SD – 4 channels Vibration Recorder

0 out of 5

(0)

GENERAL SPECIFICATIONS

Circuit	Custom one-chip of microprocessor LSI circuit.
Display	LCD size : 82 mm x 61 mm. * with green color backlight.
Channels	4 channels : CH1, CH2, CH3, CH4.
Measurement	Velocity, Acceleration, Displacement
Function	Acceleration, Velocity : RMS, Peak, Max Hold. Displacement : p-p ( peak-peak ), Max Hold p-p.
Unit	Measurement		Metric	Imperial
	Acceleration		meter/s^2, g	ft/s^2,
	Velocity		mm/s, cm/s	inch/s
	Displacement		mm	inch
Frequency range	10 Hz to 1 KHz * Sensitivity relative during the the frequency range meet ISO 2954 Refer to table 1, page 28
Circuit	Exclusive microcomputer circuit.
Peak Measurement	Acceleration, Velocity : To measure and update the peak value. Displacement : To measure and update the peak to peak ( p-p ) value.
Max Hold Measurement	Acceleration, Velocity : To measure and update the max. peak value.
	Displacement : To measure and update the max. peak to peak ( p-p ) value.
Zero Button	Under Acceleration ( RMS ) measurement, sensor motionless , press Logger Button ( 3-6, Fig. 1 ) > 5 seconds.
Max. Hold Reset Button	Under Max. hold measurement, press Logger Button ( 3-6, Fig. 1 ) > 5 seconds.
Datalogger Sampling Time Setting range	Auto	1 second to 3600 seconds @ Sampling time can set to 1 second, but memory data may loss.
	Manual	Push the data logger button once will save data one time. @ Set the sampling time to 0 second. @ Manual mode, can also select the 1 to 99 position ( Location ) no.
Data error no.	≦ 0.1 % no. of total saved data typically.
Memory Card	SD memory card 1 GB to 16 GB.
Advanced setting	* Set clock time ( Year/Month/Date, Hour/Minute/ Second ) * Decimal point of SD card setting * Auto power OFF management * Set beep Sound ON/OFF * Set sampling time * SD memory card Format
Data Hold	Freeze the display reading. * Only available for the RMS function.
Memory Recall	Maximum & Minimum value. * Only available for the RMS function.
Data Output	RS 232/USB PC computer interface. * Connect the optional RS232 cable UPCB-02 will get the RS232 plug. * Connect the optional USB cable USB-01 will get the USB plug.

Sampling Time of Display	Approx. 1 second.
Operating Temperature and Humidity	0 to 50 °C. Less than 85% R.H.
Power Supply	* Alkaline or heavy duty DC 1.5 V battery ( UM3, AA ) x 8 PCs, or equivalent.
Power Supply	* ADC 9V adapter input. ( AC/DC power adapter is optional ).
Power Current	Normal operation ( w/o SD card save data and LCD Backlight is OFF) : Approx. DC 12 mA.
Power Current	When SD card save the data and LCD Backlight is OFF) : Approx. DC 35 mA.
Weight	Meter : 515 g/ 1.13 LB.
Weight	Probe with cable and magnetic base : 99 g/0,22 LB
Dimension	Meter: 203x76x38mm Vibration sensor probe: Round 16 mm Dia. x 37 mm. Cable length : 1.2 meter.
Accessories Included	* Instruction manual………………….. 1 PC * Vibration sensor set, VB-83 with cable…………………………………….1 PC * Magnetic base…………………………1 PC * Hard carrying case………………….. 1 PC
Optional Accessories	* Vibration sensor set with cable, VB-83. * Tip type vibration sensor set, VB-84. * SD Card * AC to DC 9V adapter. * USB cable, USB-01. * RS232 cable, UPCB-02. * Data Acquisition software,SW-U801-WIN.

ELECTRICALSPECIFICATIONS (23±5°C)

Acceleration ( RMS, Peak, Max Hold )

Unit	m/s^2
Range	0.5 to 199.9 m/s^2
Resolution	0.1 m/s^2
Accuracy	± ( 5 % + 5 d ) reading @ 160 Hz, 80 Hz, 23 ± 5 °C
Calibration Point	50 m/S^2 ( 160 Hz )

Unit	g @ 1 g = 9.8 m/s^2
Range	0.05 to 20.39 G
Resolution	0.01 G
Accuracy	± ( 5 % + 5 d ) reading @ 160 Hz, 80 Hz, 23 ± 5 °C
Calibration Point	50 m/S^2 ( 160 Hz )

Unit	ft/s^2
Range	2 to 656 ft/s^2
Resolution	1 ft/s^2
Accuracy	± ( 5 % + 5 d ) reading @ 160 Hz, 80 Hz, 23 ± 5 °C
Calibration Point	50 m/S^2 ( 160 Hz )
Remark : RMS : To measure the true RMS value. Peak : To measure and update the peak value. Max. Hold : To measure and update the max. peak value.

Velocity ( RMS, Peak, Max Hold )

Unit	mm/s
Range	0.5 to 199.9 mm/s
Resolution	0. 1 mm/s
Accuracy	± ( 5 % + 5 d ) reading @ 160 Hz, 80 Hz, 23 ± 5 °C
Calibration Point	50 mm/s ( 160 Hz )

Unit	cm/s
Range	0.05 to 19.99 cm/s
Resolution	0. 01 cm/s
Accuracy	± ( 5 % + 5 d ) reading @160Hz,80Hz,23± 5°C
Calibration Point	50 mm/s ( 160 Hz )

Unit	inch/s
Range	0.02 to 7.87 inch/s
Resolution	0.01 inch/s
Accuracy	± ( 5 % + 5 d ) reading @ 160 Hz, 80 Hz, 23 ± 5 °C
Calibration Point	50 mm/s ( 160 Hz )
Remark : RMS : To measure the true RMS value. Peak : To measure and update the peak value. Max. Hold : To measure and update the max. peak value.

Displacement ( p-p, Max Hold p-p )

Unit	mm
Range	1.999 mm
Resolution	0.001 mm
Accuracy	± ( 5 % + 5 d ) reading @ 160 Hz, 80 Hz, 23 ± 5 °C
Calibration Point	0.141 mm ( 160 Hz )

Unit	inch
Range	0.078 inch
Resolution	0.001 inch
Accuracy	± ( 5 % + 5 d ) reading @ 160 Hz, 80 Hz, 23 ± 5 °C
Calibration Point	0.141 mm ( 160 Hz )
Remark : p-p : To measure the Peak to Peak value. Max. Hold p-p : To measure and update the max. Peak to Peak value.