Lutron VB-8205SD – Vibration Meter with SD Card Data Logger

Circuit

Custom one-chip of microprocessor LSI circuit.

Display

LCD size : 52 mm x 38 mm
LCD with green backlight ( ON/OFF ).

Measurement

Velocity, Acceleration, Displacement

Function

RMS, Peak, Max. Hold.

Unit

Measurement

Metric

Imperial

Acceleration

meter/s^2, G

ft/s^2

Velocity

mm/s, cm/s

inch/s

Frequency range

10 Hz to 1 KHz
* Sensitivity relative during the

the frequency range meet ISO 2954 Refer to table 1, page .

Circuit

Exclusive microcomputer circuit.

Peak Measurement

To measure and update the peak value.

Max. Hold Measurement

To measure and update the max. peak value.

Zero Button, Max. Hold Rest Button

Build in the Zero button and the Max. Hold reset button on front panel.

Zero Button

Under Acceleration ( RMS ) measurement, sensor motionless , press Logger Button

> 5 seconds.

Max. Hold Reset Button

Under Max. hold measurement, press Logger Button > 5 seconds.

Datalogger Sampling Time Setting range

Auto

1 second to 3600 seconds
@ Sampling time can set to 1 second,

but memory data may loss.

Manual

Push the data logger button once will save data one time. @ Set the sampling time to

0 second.
@ Manual mode, can also select the

1 to 99 position ( Location ) no.

Memory Card

SD memory card. 1 GB to 16 GB.

Advanced setting

• *  Set clock time ( Year/Month/Date, Hour/Minute/ Second )
• *  Decimal point of SD card setting
• *  Auto power OFF management
• *  Set beep Sound ON/OFF
• *  Set sampling time
• *  SD memory card Format

Data Hold

Freeze the display reading.

Memory Recall

Maximum & Minimum value.

Sampling Time of Display

Approx. 1 second.

Data Output

RS 232/USB PC computer interface. * Connect the optional RS232 cable UPCB-02 will get the RS232 plug.

* Connect the optional USB cable USB-01 will get the USB plug.

Operating Temperature

0 to 50 °C.