DESCRIPTION:
The Atlas Scientific EZO class embedded pH circuit, is our 6th generation embedded pH circuit. This EZO class pH circuit, offers the highest level of stability and accuracy. With proper con guration the EZO class pH circuit, can meet, or exceed the accuracy and precision found in most bench top laboratory grade pH meters. The pH-EZO pH circuit, can work with any off-the-shelf pH probe/ sensor/electrode. This device reads pH from a pH probe/sensor/electrode. This device does not include a pH probe/sensor/electrode.
FEATURES:
Reads
- Full range pH reading from .001 to 14.000
- Accurate pH readings down to the thousandths place (+/- 0.02)
- Temperature dependent or temperature independent readings
- Flexible calibration protocol supports single point, 2 point, or 3 point calibration
- Calibration required only once per year with Atlas Scientific pH probe
- Single reading or continuous reading modes
- Data format is ASCII
Two data protocols
- UART asynchronous serial connectivity
- (RX/TX voltage swing 0-VCC)
- I2C (default I2C address 0x63)
- Compatible with any microprocessor that supports UART, or I2C protocol
- Operating voltage: 3.3V to 5V
- Works with any off-the-shelf pH probe
Sleep mode power consumption
- 0.995mA at 3.3V
WHAT'S IN THE BOX?
1 EZO pH Circuit
1 scientific grade silver / silver chloride pH Probe.
3 125ml (4oz) calibration solutions (pH 4, pH 7 and pH 10)
1 125ml (4oz) pH storage solution
1 Pre-Assembled Female BNC connector
Female BNC Spec
Thread Size " - 36 UNS Thread type
This pH Probe can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely.
Digital Oscilloscope
View full size 
