Atlas Scientific Conductivity K 0.1 Kit

Conductivity Kit K 0.1
0.07 S/cm to 50,000 S/cm 

DESCRIPTION:
The Atlas Scientific EZO class embedded electrical conductivity circuit is our 6th generation embedded electrical conductivity circuit. The EC-EZO electrical conductivity circuit can work with any off-the-shelf two conductor conductivity probe from K 0.1 to K 10. This includes any value between K 0.1 and K 10 such as K 0.66 or K 4.78. This device reads electrical conductivity from an E.C. probe/sensor/electrode. This device does not include an E.C. probe/ sensor/electrode.

Features
Reads
- Conductivity
- Total dissolved solids
- Practical salinity units
- Speci c gravity of sea water
- Accuracy +/- 2%
- Full E.C. range from 0.07 s/cm to 500,000+ s/cm
- Temperature dependent or temperature independent readings
- Flexible calibration protocol supports single point or dual point calibration
- Calibrate to any E.C. value
- Calibration required only once per year
- Data format is ASCII

Two data protocols
- UART asynchronous serial connectivity (RX/TX voltage swing 0-VCC)
- I2C (default I2C address 0x64)
- Operating voltage: 3.3V to 5V
- Works with any off-the-shelf two conductor conductivity probe
- Works with any K value from K 0.1 to K 10

Sleep mode power consumption
- 0.4mA at 3.3V

WHAT'S IN THE BOX?
1 EZO Conductivity Circuit
1 Conductivity Probe: 0.07 S/cm to 50,000 S/cm
2 125ml (4oz) calibration solutions 
K 0.1 - This set includes 1 (84S) and 1 (1,413S)
1 Pre-Assembled Female BNC connector
1 PWR-ISO (optional) 
Probe Max PSI: 1379 kPa (200PSI) 
Probe Weight: 51 grams