View full size Digital Oscilloscope
GW INSTEK GDS-122
Handheld Digital Storage Osciloscope 20MHz
Call 022 7106162
Features:
VERTICAL | |
| Channels | 2 |
| Analog Bandwidth | 20MHz |
| Single Bandwidth | Full bandwidth |
| Rise Time | 17.5ns |
| Sensitivity | 5mV/div ~ 5V/div at the BNC input |
| DC Gain Accuracy | ±5% |
| DC Measurement Accuracy | ±(5% reading + 0.05div): average sampling |
| Analog Digital Converter Resolution | 8 bits, synchronously sampling on both channels |
| Displacement Range | ±50V (500mV ~ 5V), ±1V (5mV ~ 200mV) |
| Low Frequency Response AD Coupling, -3dB | ±5Hz at the BNC input |
TRIGGER | |
| Sources | CH1, CH2 |
| Trigger Sensitivity | 2div, peak-to-peak value |
| Trigger Sensitivity Edge Trigger | DC coupling: 1div (full bandwidth) AC coupling: same as the DC coupling (≧50Hz) |
| Trigger Level Range | ±6div from the screen center |
| Trigger Level Accuracy | ±0.3div typical |
| Trigger Displacement | 655div (pre-trigger), 4div (post-trigger) |
| 50% Level Setting | Input signal ≧50Hz (typical) |
| Video Trigger | NTSC, PAL, SECAM (any line or frequency) |
HORIZONTAL | |
| Sampling Rate | 10S/s ~ 100MS/s |
| Waveform Interpolation | sinx/x |
| Record Length | 6k points on each channel |
| Scan Speed | 5ns/div ~ 5s/div, 1-2.5-5 step |
| Sampling Rate and Relay Time Accuracy | ±100ppm (≧1ms) |
| Time Interval Accuracy (Full Bandwidth) | Single: ±(1 sampling interval time + 100ppm x reading + 0.6ns) Average >16: ±(1 sampling interval time + 100ppm x reading + 0.4ns) |
INPUT | |
| Input Coupling | DC, AC |
| Input Impedance | 1MΩ ±2%, connected in parallel with 20pF±3pF |
| Probe Attenuation Coefficient | 1X, 10X, 100X, 1000X |
| Maximum Input Voltage | 400V (peak) |
| Channel Delay Time | 150ps (typical) |
SAMPLING | |
| Sampling Mode | Normal, Peak Detect, Average |
| Sampling Rate | 100MSa/s |
MEASUREMENT | |
| Cursor Measurement | Voltage difference and Time difference between cursors |
| Auto Measurement | Peak-to-peak, Average, Root mean square, Frequency, Cycle |
MULTIMETER SPECIFICATIONS | |
| Input Impedance | 10MΩ |
| Voltage | VDC: 400mV, 4V, 400V ±(1% + 1digit) VDC: 4V, 40V, 400V ±(1% + 3digits) |
| Maximum Input Voltage | DC 400V, AC 400V (virtual value) |
| Frequency | 40Hz ~ 400Hz |
| DC Current | 40mA, 400mA ±(1.5% + 1digit), 20A ±(3% + 3digits) |
| AC Current | 40mA ±(1.5% + 3digits), 400mA ±(2% + 1digit), 20A ±(5% + 3digits) |
| Impedance | 400Ω ±(1% + 3digits), 4kΩ, 40kΩ, 400kΩ, 4MΩ ±(1% + 1digit), 40MΩ ±(1.5% + 3digits) |
| Capacitance | 51.2nF ~ 100uF ±(3% + 3digits) |
| Diode | 0V ~ 1.5V on/off measurement < 50Ω (±30Ω) beep |
GENERAL SPECIFICATIONS | |
| Display Type | 3.8" color liquid crystal display |
| Display Resolution | 320 (horizontal) x 240 (vertical) pixels |
| Display Color | 4096 colors |
| Power Supply | 100 ~ 240VAC, 50Hz, CATII |
| Power Consumption | <6W |
| Operating Temperature | Battery Operation: 0 ~ 50℃ (32 ~ 122F) Power adaptor operation: 0 ~ 40℃ (32 ~ 104F) |
| Dimensions & Weight | 180 x 115 x 40 mm; Approx 0.69kg |
Included Accessories
User manual x1
AC-DC Adaptor x1
Probe-P6060: 60MHz (10:1/1:1) switchable passive probe (one per channel)
Multimeter test lead x1
Serial data communication cable x1
Extension module for small capacitance measurement x1
Extension module for large current measurement x1
Website kami saat ini dalam proses pengembangan sehingga ada beberpa produk yang belum bisa kami tampilkan, untuk informasi anda bisa contact kami langsung ke no. Tel +62 (22) 7106162, atau anda bisa melakukan live chat dengan customer service kami.
©2009 DUTA PERSADA INSTRUMENTS
Digital Oscilloscope
