Categories

Manufacturers

Newsletter

http://dutapersada.co.id/530-thickbox_default/gw-instek-grs-6000a-series.jpg View full size

GW INSTEK GRS-6000A Series

Home

GW INSTEK GRS-6000A Series

Digital Storage Oscilloscope 50 / 30 MHz

RS232PCSoftware

More details

Call 022 7106162

Add Subtract

Features

  • 50M/30MHz with 100MSa/s and 2 Channles
  • Equivalent Time Sampling of 500MSa/s max.
  • Acquire Mode : Peak Detect, Envelop, Persistence
  • Pre-Trigger Function 0 ~ 10 div
  • ROLL Mode to 100s/div
  • Waveform SAVE/RECALL 10 sets (REF0~REF9)
  • Max. Sweep Rate 10ns/div
  • Panel Setting SAVE/RECALL 10 sets (M0~M9)
  • RS-232C Interface

 

 
GRS-6052A
GRS-6032A
CRT 
Type and Acceleration
6-inch CRT, 10kV
6-inch CRT, 2kV
IlluminationFront panel control
Z-axis InputSensitivity : at least 5V
Polarity : positive going input decreases intensity
Max. input voltage:30V(DC+ACpeak)
Input Impedance : approx. 33kΩInput Impedance : approx. 47kΩ
VERTICAL SYSTEM
Deflection Coefficient and Accuracy1mV ~ 2mV/div ±5%,
5mV ~ 20V/div ±3%,
14 steps in 1-2-5 sequence
Variable Continuity2.5 : 1 ~ min. 50V/div
Bandwidth (-3dB)1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~50MHz
1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~30MHz
Vertical ModeCH1, CH2, DUAL (ALT or CHOP)
Chopper FrequencyApprox. 250kHz
Sum or DifferenceCH1+CH2, CH1-CH2
InvertCH2
Input Impedance1MΩ ±2%//approx. 25pF
Input CouplingAC, DC, GND
Input VoltageMax. 400V(DC+ACpeak)
HORIZONTAL SYSTEM
Sweep Time0.2μs/div ~ 0.5s/div, 20 steps
Variable Continuity2.5 : 1 up to 1.25s/div (uncal.)
Accuracy±3%, ±5% at x5/ x10MAG. ±8% at x 20MAG
Sweep Magnificationx5, x10, x20
Max. Sweep Time20ns/div (10ns/div uncal)50ns/div (10ns~40ns/div uncal)
ALT-MAG FunctionYes
HOLD-OFF TimeVariable
TRIGGER 
Trigger ModeAUTO, NORM, TV
Trigger SourceVERT, CH1, CH2, LINE, EXT
Trigger CouplingAC, HFR, LFR
Trigger Slope “+”or“ - ”polarity
ALT TriggerYes
Indicator Trigger LEDYes
TV Sync. SeparatorTV-V“-”, TV-H“ - ”
Trigger Sensitivity
 
GRS-6052A
20Hz~5MHz
5MHz~40MHz
40Hz~50MHz
GRS-6032A
20Hz~2MHz
2MHz~20MHz
20Hz~30MHz
CH1, CH2
0.5div
1.5div
2.0div
Vert-Mode
2.0div
3.0div
3.5div
EXT
200mV
800mV
1V
TV sync. pulse more than 1 div or 200mV (EXT)
External Trigger Input
 
Input impedance :Approx. 1MΩ//25pF (AC coupling)
Max. input voltage : 400V (DC + ACpeak)
X-Y OPERATION
InputX-axis : CH1 ; Y-axis : CH2
Sensitivity1mV/div ~ 20V/div
BandwidthX-axis : DC ~ 500kHz (-3dB)
X-Y Phase Shift<3° from DC ~ 50kHz
DIGITAL STORAGE
Acquisition Digitizer8 bit ADC x 2
Max. Sampling Rate
 
500MSa/s for equivalent time sampling
100MSa/s for normal sampling
Storage BandwidthSingle shot: DC ~ 25MHz
Repetitive: DC ~50MHz
Single shot: DC ~ 25MHz
Repetitive: DC ~30MHz
Dynamic Range±5div
Memory Length- Acquisition Memory 2k words/CH x 2, 1k words/CH(equivalent)
Memory Length- Save REF Memory1k words/CH x 10 with back-up memory (REF0~REF9)
Memory Length- Display Memory1k words/CH x 4 waveform(max.)
Sweep TimeEquivalent: 0.2μs/div ~ 0.5μs/div
Normal Sample: 1μs/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div
Sweep Magnificationx 5, x 10, x 20
Max.Sweep Time10ns/div
MAG InterpolationDOTS, LINEAR
ALT-MAG FunctionYes
Acquire ModeSample, peak detect(>25ns), Envelop. Persist, Average(2~256)
Operation ModeAuto, Norm, Single, Single-roll, Roll, X-Y, Run/Stop
Smoothing FunctionDot joint ON/OFF selectable
Pre-TriggerPre-trigger 0 ~10div in 0.02div steps
X-Y OperationX-axis: CH1 Y-axis: CH2
Storage BandwidthDC~50MHz(-3dB)
Display ResolutionH: 100points/div; V: 25points/div;
X-Y: 25 x 25 points/div
SAVE/ RECALL
Panel Setting10 sets(M0 ~M9)
Waveform10 sets(REF0~REF9)
READOUT & CURSOR
Cursor MeasurementΔV, ΔT, 1/ ΔT
Readout IntensityAdjustable
OUTPUT SIGNAL
CH1 Signal OutputVoltage : approx. 20mV/div (with 50Ω terminated)
Bandwidth : 50Hz ~ 5MHz
Calibrator Output
 
Voltage : 0.5V±3%
Frequency : approx. 1kHz, square wave
INTERFACE
 RS-232C
POWER SOURCE 
 AC 100V/120V/230V±10%, 50/60Hz
DIMENSIONS & WEIGHT
 275(W) x 130(H) x 370(D) mm; Approx. 8.5kg

 

Included Accessories:

User manual x 1, Power Cord x 1
GTP-060A-4: 60MHz (10:1/1:1) switchable passive probe (one per channel)

Optional Accessories
GTL-110  Test lead, BNC-BNC heads
GTL-232  RS232 cable, 9 pin female to 9 pin, Null modem for computer
GTC-001  Instrument cart, 450(W) x 430(D)mm (120V input socket)
GTC-002  Instrument cart, 330(W) x 430(D)mm (120V input socket)

Write your review

GW INSTEK GRS-6000A Series

GW INSTEK GRS-6000A Series

GW INSTEK GRS-6000A Series

Digital Storage Oscilloscope 50 / 30 MHz

RS232PCSoftware

Write your review

16 other products in the same category:

top