Lutron FR-5120 – Fruit Hardness Tester 20 Kg
Stok 5
The FR-5120 Precision Fruit Sclerometer is designed to measure the hardness of various fruits, making it an essential tool for fruit quality assessment and agricultural research.
Status Barang: Preorder (8 minggu)
Kondisi: Baru
Minimal Order: 1 pcs
Rp5.341.000,0
Stok 5
FRUIT HARDNESS TESTER 20 Kg
Model: FR-5120
OVERVIEW:
The tester is used to measure the hardness of most kind fruits such as apple, pear, strawberry, grape, large/hard fruits, small/soft fruits. It is suitable for the fruit scientific research department, fruit company, fruit farm, agriculture colleges and universities to improve the fruit quality, the harvest storage, the product transportation… by the fruits #39; hardness. The useful tester to judge fruit’s mature degree.
FEATURES:
◆ Max. capacity : 20 Kgf x 0.01 Kgf ( 10 gf ).
◆ Use load cell sensor, high precision.
◆ Positive/ Reverse display.
◆ RS-232/USB computer interface
◆ Complete set with hard carrying ca
se and 4 kind tips (3 mm, 6 mm, 8 mm, 11 mm)
◆ Full capacity zero (tare) control capability
◆ Fast/Slow response time push button
◆ Hand held amp; stand mounted gauges are available.
EACH UNIT INCLUDES WITH:
◆ Operating manual
◆ 11 mm Penetrometer Tip, FRTP-11
◆ 8 mm Penetrometer Tip, FRTP-8
◆ 6 mm Penetrometer Tip, FRTP-6
◆ 3 mm Penetrometer Tip, FRTP-3
◆ Carrying case
OPTIONAL ACCESSORIES:
◆ Test stand, FS-1001
◆ RS232 cable, UPCB-01
◆ SD card data recorder, DL-9602SD
◆ Software for data logging amp; data recorder, SW-U801-WIN
| Berat | 1,5 kg |
|---|
SPECIFICATIONS
|
Principal |
The hardness of Fruit can express by the unit area ( S ) could undertake the pressure of dynamometer ( N) , their specific value is just as the hardness ( P ). P=N/S |
|
Display |
LCD ( Liquid crystal display ). |
|
Display Direction |
Positive or Reverse direction, select by the push button on the front panel. |
|
Function |
Tension & Compression (Push & Pull). Normal force, Peak hold ( Max. load ). |
|
Peak hold |
Will freeze the display value of the Peak load ( Max. load ). |
|
Zero |
Zero button can be operated both for “normal force” or “peak hold” operation |
|
Unit select |
Kg/Newton/LB. |
|
Measure Capacity |
20.00 Kg/44.10 LB/196.10 Newton. |
|
Resolution |
0.01 Kg/0.01 LB/0.05Newton. |
|
Min. Display |
0.02 Kg/0.07 LB/0.3 Newton, |
|
Accuracy |
± (0.5 % + 2 digits), within 23± 5°C. * Under the test weight on 10 Kg & 20 Kg. |
|
Update time |
Fast Approx. 0.2 second. Slow Approx. 0.6 second. |
|
Over range Indicator |
Display show ” – – – – ” when in over range status. |
|
Data output |
RS-232 serial computer interface. |
|
Overload Capacity |
Max. 30 kg. |
|
Full Scale Deflection |
Approx. 0.4 mm max. |
|
Zero/tare Control |
Max. full capacity. |
|
Circuit |
Exclusive microprocessor LSI-circuit. |
|
Power Supply |
6 x 1.5 V AA (UM-3) size battery or DC 9V adapter (not included). |
|
Power Consumption |
Approx. DC 28 mA |
|
Transducer |
Exclusive load cell. |
|
Operating Temperature |
0°C to 50°C ( 32°F to 122°F ). |
|
Operating Humidity |
Less than 80% RH. |
|
Dimension |
215 x 90 x 45 mm ( 8.5 x 3.5 x 1.8 inch ). |
|
Weight |
650 g ( 1.43 LB )/with batteries. |
|
Data output |
RS-232 serial computer interface |
|
Mounting Holes |
Main instrument with mounting holes are provided on the back case, easy stand mounting. |
|
Accessories Included |
Operating manual …………………………….. 1 PC. |
|
Optional Accessories |
* Test stand, Model : FS-1001 * Software for data logging & data recorder, Model : SW-U801-WIN. |
Based on 0 reviews
Be the first to review “Lutron FR-5120 – Fruit Hardness Tester 20 Kg”
Produk Terkait
-
Ready Stock
-
Pre-OrderAir Quality Meter
Lutron DL-9602SD – Real Time SD Card Data Logger
The DL-9602SD Set offers accurate and reliable measurements along with real-time data recording capabilities, making it an essential tool for various applications in electrical maintenance, troubleshooting, industrial environments, and quality control.
SKU: L-DL9602SD -
Ready StockAir Quality Meter
Lutron BVB-8207SD – 4 channels Vibration Recorder
GENERAL SPECIFICATIONS
Circuit
Custom one-chip of microprocessor LSI circuit.
Display
LCD size : 82 mm x 61 mm. * with green color backlight.
Channels
4 channels :
CH1, CH2, CH3, CH4.Measurement
Velocity, Acceleration, Displacement
Function
Acceleration, Velocity : RMS, Peak, Max Hold.
Displacement :
p-p ( peak-peak ), Max Hold p-p.Unit
Measurement
Metric
Imperial
Acceleration
meter/s^2, g
ft/s^2,
Velocity
mm/s, cm/s
inch/s
Displacement
mm
inch
Frequency range
10 Hz to 1 KHz
* Sensitivity relative during thethe frequency range meet ISO 2954 Refer to table 1, page 28
Circuit
Exclusive microcomputer circuit.
Peak Measurement
Acceleration, Velocity :
To measure and update the peak value.Displacement :
To measure and update the peak to peak ( p-p ) value.Max Hold Measurement
Acceleration, Velocity :
To measure and update the max. peak value.Displacement :
To measure and update the max. peak to peak ( p-p ) value.Zero Button
Under Acceleration ( RMS ) measurement, sensor motionless , press Logger Button
( 3-6, Fig. 1 ) > 5 seconds.Max. Hold Reset Button
Under Max. hold measurement, press Logger Button ( 3-6, Fig. 1 ) > 5 seconds.
Datalogger Sampling Time Setting range
Auto
1 second to 3600 seconds
@ Sampling time can set to 1 second,but memory data may loss.
Manual
Push the data logger button once will save data one time. @ Set the sampling time to
0 second.
@ Manual mode, can also select the1 to 99 position ( Location ) no.
Data error no.
≦ 0.1 % no. of total saved data typically.
Memory Card
SD memory card 1 GB to 16 GB.
Advanced setting
- * Set clock time ( Year/Month/Date, Hour/Minute/ Second )
- * Decimal point of SD card setting
- * Auto power OFF management
- * Set beep Sound ON/OFF
- * Set sampling time
- * SD memory card Format
Data Hold
Freeze the display reading.
* Only available for the RMS function.Memory Recall
Maximum & Minimum value.
* Only available for the RMS function.Data Output
RS 232/USB PC computer interface. * Connect the optional RS232 cable UPCB-02 will get the RS232 plug.
* Connect the optional USB cable USB-01 will get the USB plug.
Sampling Time of Display
Approx. 1 second.
Operating Temperature and Humidity
0 to 50 °C.
Less than 85% R.H.Power Supply
* Alkaline or heavy duty DC 1.5 V battery ( UM3, AA ) x 8 PCs, or equivalent.
* ADC 9V adapter input. ( AC/DC power adapter is optional ).
Power Current
Normal operation ( w/o SD card save data and LCD Backlight is OFF) :
Approx. DC 12 mA.
When SD card save the data and LCD Backlight is OFF) :
Approx. DC 35 mA.
Weight
Meter : 515 g/ 1.13 LB.
Probe with cable and magnetic base : 99 g/0,22 LB
Dimension
Meter: 203x76x38mm Vibration sensor probe:
Round 16 mm Dia. x 37 mm. Cable length : 1.2 meter.
Accessories Included
- * Instruction manual………………….. 1 PC
- * Vibration sensor set, VB-83 with
cable…………………………………….1 PC
- * Magnetic base…………………………1 PC
- * Hard carrying case………………….. 1 PC
Optional Accessories
* Vibration sensor set with cable, VB-83. * Tip type vibration sensor set, VB-84.
* SD Card
* AC to DC 9V adapter.* USB cable, USB-01.
* RS232 cable, UPCB-02.
* Data Acquisition software,SW-U801-WIN.ELECTRICALSPECIFICATIONS (23±5°C)
Acceleration ( RMS, Peak, Max Hold )
Unit
m/s^2
Range
0.5 to 199.9 m/s^2
Resolution
0.1 m/s^2
Accuracy
± ( 5 % + 5 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 °CCalibration Point
50 m/S^2 ( 160 Hz )
Unit
g @ 1 g = 9.8 m/s^2
Range
0.05 to 20.39 G
Resolution
0.01 G
Accuracy
± ( 5 % + 5 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 °CCalibration Point
50 m/S^2 ( 160 Hz )
Unit
ft/s^2
Range
2 to 656 ft/s^2
Resolution
1 ft/s^2
Accuracy
± ( 5 % + 5 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 °CCalibration Point
50 m/S^2 ( 160 Hz )
Remark :
RMS : To measure the true RMS value.
Peak : To measure and update the peak value.
Max. Hold : To measure and update the max. peak value.Velocity ( RMS, Peak, Max Hold )
Unit
mm/s
Range
0.5 to 199.9 mm/s
Resolution
0. 1 mm/s
Accuracy
± ( 5 % + 5 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 °CCalibration Point
50 mm/s ( 160 Hz )
Unit
cm/s
Range
0.05 to 19.99 cm/s
Resolution
0. 01 cm/s
Accuracy
± ( 5 % + 5 d ) reading @160Hz,80Hz,23± 5°C
Calibration Point
50 mm/s ( 160 Hz )
Unit
inch/s
Range
0.02 to 7.87 inch/s
Resolution
0.01 inch/s
Accuracy
± ( 5 % + 5 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 °CCalibration Point
50 mm/s ( 160 Hz )
Remark :
RMS : To measure the true RMS value.
Peak : To measure and update the peak value.
Max. Hold : To measure and update the max. peak value.Displacement ( p-p, Max Hold p-p )
Unit
mm
Range
1.999 mm
Resolution
0.001 mm
Accuracy
± ( 5 % + 5 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 °CCalibration Point
0.141 mm ( 160 Hz )
Unit
inch
Range
0.078 inch
Resolution
0.001 inch
Accuracy
± ( 5 % + 5 d ) reading
@ 160 Hz, 80 Hz, 23 ± 5 °CCalibration Point
0.141 mm ( 160 Hz )
Remark : p-p :
To measure the Peak to Peak value. Max. Hold p-p :
To measure and update the max. Peak to Peak value.
SKU: L-BVB8207SD -
Pre-OrderAir Quality Meter
Lutron RGB-1002 – Color Analyzer
Lutron RGB-1002 is a professional color measurement instrument designed to accurately measure RGB (Red, Green, Blue) values of light sources and illuminated objects. It is suitable for applications in lighting evaluation, quality control, display testing, and research purposes.
SKU: L-RGB1002
There are no reviews yet.