Categories

Manufacturers

Newsletter

http://dutapersada.co.id/548-thickbox_default/hioki-3286-20.jpg View full size

HIOKI 3286-20

Clamp Meter

CLAMP ON POWER HiTESTER

HIOKI 3286-20

More details

Call 022 7106162

Add Subtract

Functionality and Safety Packed into a Handheld Unit

  • Single phase 600 kW & up to 20th Harmonic levels measurement
  • Active/ reactive/ apparent power, Power factor, Phase detection, Frequency, Harmonic waveform value, or Waveform peak value
  • Simple checking of three-phase lines (Should be balanced and no distortion)


Note: The 3286-20's three-phase power measurement method calculates and displays the power values for a sine wave input at 50/60 Hz, assuming it is balanced and there is no distortion. Accurate measurement is not possible on a three-phase line if it is not balanced, for example when controlled by an inverter or thyristor. Since there is no integration function, it is not possible to measure total energy consumed (Wh).

 

Specifications:

Measurement lineSingle-phase, Three-phase (should be balanced and no distortion)
Measurement itemsVoltage, Current, Voltage/current peak, Active/ reactive/ apparent power, Power factor, Phase angle, Reactivity, Frequency, Voltage/current harmonic levels
Voltage ranges
30 - 1kHz
150.0 V to 600 V, 3 ranges
Basic accuracy: ±1.0 % rdg. ±3 dgt. (at 45 - 66 Hz, True RMS)
Current ranges
45 - 1kHz
20.00 A to 1000 A, 3 ranges
Basic accuracy: ±1.3 % rdg. ±3 dgt. (at 45 - 66 Hz, True RMS)
Power ranges
80 - 600 V
1 - 1000 A
[Single phase] 3.000 kW to 600.0 kW
Basic accuracy: ±2.3 % rdg. ±5 dgt. (at 50/60 Hz, Power factor = 1)
[Balanced three phase] 6.000 kW to 1200 kW
Basic accuracy: ±3.0 % rdg. ±10 dgt. (at 50/60 Hz, Power factor = 1)
Harmonic levelsVoltage/current harmonic levels up to 20th, Content factor, Total harmonic distortion ratio
Other function[Phase angle] Forward 90.0° to 0 to delay 90.0°
[Power factor] Forward 0 to 1.000 to delay 0
[Frequency] 30.0 Hz to 1000 Hz
Waveform peak, Phase detection, Max. / Min. value record, Data hold, Auto-power off, RS-232C output (Options are discontinued, so cannot use RS-232C)
DisplayLCD, Max. 6000 digits, Display refresh rate: 1 time/s (Normal) 1 time/3sec (Slow), 1 time/2sec (Harmonic level)
Power supplyStacked alkaline battery (6LR61, 6LF22) ×1, Continuous use: 25 hours
Core jaw dia.φ 55 mm (2.17 in) or 80 mm (3.15 in) × 20 mm (0.79 in) busbar
Dimensions, mass100 mm (3.94 in) W × 287 mm (11.3 in) H × 39 mm (1.54 in) D, 650 g (22.9 oz)
Supplied accessoriesCARRYING CASE 9245 ×1, VOLTAGE CORD L9635-01 ×1, Hand strap ×1, Dry cell battery (6LF22) ×1, Instruction Manual ×1

Write your review

HIOKI 3286-20

HIOKI 3286-20

CLAMP ON POWER HiTESTER

HIOKI 3286-20

Write your review

29 other products in the same category:

top