Categories

Manufacturers

Newsletter

http://dutapersada.co.id/547-thickbox_default/hioki-3284.jpg View full size

HIOKI 3284

Clamp Meter

CLAMP ON AC/DC HiTESTER
HIOKI 3284

More details

Call 022 7106162

Add Subtract

Overview:

Analysis for DC to distorted waves

  • Analog output for current measuring level, current measuring waveform, or frequency measuring level.
  • The peak hold function displays the crest value of the inrush current occurring when electrical equipment is started
  • The AC+DC mode enables measurement of the RMS value of full- or half-wave rectified waveforms

 

Specifications:

DC Current20.00/ 200.0 A, Basic accuracy: ±1.3 % rdg. ±3 dgt.
AC Current20.00/ 200.0 A, (10 Hz to 2 kHz, True RMS),
Basic accuracy: ±1.3 % rdg. ±3 dgt.
DC Voltage30.00 V to 600 V, 3 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt.
AC Voltage30.00 V to 600 V, 3 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. (10 to 1 kHz, True RMS)
Crest factor2.5 and under (1.5 at 200 A, 1.7 at 600 V)
Monitor, Analog outputDC, or AC 1 V/ f.s., Level output, Waveform output: DC to 20 kHz Band-width (±3dB)
Resistance, Continuity checkNone
Frequency1.00 Hz to 1000 Hz, Basic accuracy: ±0.3 % rdg. ±1 dgt.
Other functionAC+DC mode, Maximum/ Minimum/ Average value record function, Data hold, Peak hold, Auto power off, Auto zero
DisplayDisplay refresh rate: 4 times/s (at FAST), 1 time/3s (at SLOW), 4 times/s (bar graph)
Power supply6F22 (Stacked manganese battery) ×1, Continuous use: 25 hours, or AC adapter 9445-02
Core jaw dia.φ33 mm (1.30 in)
Dimensions, mass62 mm (2.44 in) W × 230 mm (9.06 in) H × 39 mm (1.54 in) D, 460 g (16.2 oz)
Supplied accessoriesTEST LEAD L9207-10 ×1, CARRYING CASE 9399 ×1, Hand strap ×1, 6F22 (Stacked manganese battery) ×1, Instruction Manual ×1

Write your review

HIOKI 3284

HIOKI 3284

CLAMP ON AC/DC HiTESTER
HIOKI 3284

Write your review

top