Datalogger / Data Acquisition
Showing all 14 results
-
Ready StockData Acquisition (DAQ)
LabJack CB15 – Terminal Board for U3 T7 U6 UE9 T4 Series
The CB15 provides convenient screw terminals for the 12 digital I/O lines on the DB15 connector of compatible LabJack devices. Includes a screwdriver. Not compatible with the U12.
The snaptrack shipped with this accessory is not compatible with DIN rail mounting systems. To mount this accessory to DIN rails, purchase our DIN Rail Mounting Clips, which come with 3D printed adapters that snap directly onto the accessory PCB.
SKU: LJ-CB15 -
Ready StockData Acquisition (DAQ)
LabJack CB37 – Terminal Board for T7 U6 UE9 Series
Provides convenient screw terminals for the DB37 connector on the LabJack U6, UE9, and T7. Includes a screwdriver. Compatible with LJTick signal-conditioning modules.
The snaptrack shipped with this accessory is not compatible with DIN rail mounting systems. To mount this accessory to DIN rails, purchase our DIN Rail Mounting Clips, which come with 3D printed adapters that snap directly onto the accessory PCB.
SKU: LJ-CB37 -
Ready StockData Acquisition (DAQ)
LabJack LJTick-CurrentShunt – (LJTCS) for U3, U6, UE9, T7, or T4 Series
The LJTick-CurrentShunt (LJTCS) is a signal-conditioning module designed to convert a 4-20 mA current loop input signal into a 0.47-2.36 volt signal compatible with the LabJack U3, U6, UE9, T7, or T4. The 4-pin design plugs into the standard AIN/AIN/GND/VS screw terminal block found on LabJacks such as the U3, U6, UE9, T7, and T4.
SKU: LJ-TickCurrentShunt -
Ready StockData Acquisition (DAQ)
LabJack LJTick-DAC – Analog Outputs for U3 U6 UE9 T4 T7 Series
Provides a pair of 14-bit analog outputs with a range of +/- 10 volts. Plugs into any digital I/O block (e.g. FIO4/FIO5), and thus up to 10 of these can be used per LabJack to add 20 analog outputs. Works with T-Series devices (T4/T7/T8) and any UD family device (U3/U6/UE9).
SKU: LJ-TickDAC -
Ready StockData Acquisition (DAQ)
LabJack LJTick-InAmp – Instumentation Amplifier for U3 T7 U6 UE9 T4 Series
The LJTick‑InAmp 2 (LJTIA 2) is a signal‑conditioning module designed to amplify low‑level differential signals such as those from bridge circuits (strain gauges) and thermocouples. Each of its two instrumentation amplifiers converts a differential input into a single‑ended output, making it ideal for precision measurements with LabJack devices.
SKU: LJ-TickInAmp -
Ready StockData Acquisition (DAQ)
LabJack LJTick-InBuff (LJTIB) – Input Buffer for U3 U6 UE9 T4 T7 Series
Very low bias current (1pA) input buffer which can directly measure pH sensors (electrode type sensors) and other weakly driven or high source impedance signals. The analog inputs on our compatible DAQ products (U3, U6, UE9, T4, T7) have typical bias currents on the order of 20 nA, which is quite low, but the LJTick-InBuff reduces that dramatically.
SKU: LJ-TickInBuff -
Ready StockData Acquisition (DAQ)
LabJack Mux80 – AIN Expansion Board for T7 U6 UE9 Series
Analog input expansion board that adds 80 analog input channels. It can be connected to a U6/Pro, UE9, or T7/Pro directly through the DB37 connector. Ten of the LabJack’s analog inputs are multiplexed (1:8 each) by the Mux80, and 4 are left untouched on AIN0-3 screw terminals, bringing the total number of available analog inputs to 84.
SKU: LJ-MUX80 -
Ready StockData Acquisition (DAQ)
LabJack T4 – Multifunction Data Acquisition with Ethernet & USB
Choose the T4 for low cost Ethernet connectivity and the same software API as our flagship T7 device. The T4 has 4 dedicated high voltage (±10V, 12-bit resolution) as well as up to 8 configurable low voltage analog inputs (0-2.5V, 12-bit resolution). The T4 also has numerous built-in firmware features to help users accomplish most data acquisition needs.
SKU: LJ-T4 -
Ready StockData Acquisition (DAQ)
LabJack T7 – Ethernet and USB Multifunction Data Acquisition DAQ 16-bit
Choose the LabJack T7 for ultimate power and data acquisition flexibility. With 16-bit analog inputs, the option to use USB or Ethernet, and numerous built-in firmware features, the T7 can help you accomplish nearly any DAQ need. The LabJack T7 also has 2 analog outputs (12-bit), 23 digital I/O, and up to 10 digital counters/timers.
With 14 instrumentation amplified analog inputs, software selectable gain settings, dozens of digital I/O features, and a Modbus TCP front-end, the T7 is a versatile multifunction DAQ platform. Common applications include laboratory research, industrial control and monitoring, automated testing, and prototype development. Additionally, T7 devices are capable of stand-alone operation by running Lua scripts.
SKU: LJ-T7 -
Ready StockData Acquisition (DAQ)
LabJack T7-Pro – Ethernet & USB Multifunction Data Acquisition with WiFi 24-bit (DAQ)
Data Acquisition (DAQ)LabJack T7-Pro – Ethernet & USB Multifunction Data Acquisition with WiFi 24-bit (DAQ)
All the features of the normal T7 with the major addition of WiFi connectivity and an auxiliary low-speed high-resolution (24-bit) sigma-delta ADC. The T7-Pro also includes a real time clock (RTC) and 4GB MicroSD card for standalone datalogging.
With 14 instrumentation amplified analog inputs, software selectable gain settings, dozens of digital I/O features, and a Modbus TCP front-end, the T7 is our most versatile multifunction DAQ platform. Common applications include laboratory research, industrial control and monitoring, automated testing, and prototype development.
SKU: LJ-T7PRO -
Ready StockData Acquisition (DAQ)
LabJack U3-HV – USB Multifunction Data Acquisition with 12 Flexible I/O (DAQ)
USB DAQ device with 4 dedicated ±10V, 12-bit analog inputs, 12 flexible I/O, and 4 dedicated digital I/O. The flexible I/O can be configured as either digital or analog, thus providing up to 16 analog inputs, or up to 16 digital I/O. It also has two 10-bit analog outputs, up to 2 counters, and up to 2 timers.
SKU: LJ-U3HV -
Ready StockData Acquisition (DAQ)
LabJack U3-LV – USB Multifunction Data Acquisition with 16 Flexible I/O (DAQ)
USB DAQ device with 4 dedicated analog inputs, 12 flexible I/O, and 4 dedicated digital I/O. The flexible I/O can be configured as either digital or analog, thus providing up to 16 to 20 analog inputs, or up to 16 digital I/O. It also has two 10-bit analog outputs, up to 2 counters, and up to 2 timers.
SKU: LJ-U3LV -
Ready StockData Acquisition (DAQ)
LabJack U6 – Precision USB Multifunction Data Acquisition with 14 Analog Inputs (DAQ)
Data Acquisition (DAQ)LabJack U6 – Precision USB Multifunction Data Acquisition with 14 Analog Inputs (DAQ)
The LabJack U6 is great for acquiring signals from thermocouples, strain gages, bridge circuits, encoders, and nearly any sensor that outputs a voltage or current.
With instrumentation amplified analog inputs, and software selectable gain settings, the U6 provides a cost effective, USB only method to measure analog signals which can’t be resolved by traditional 12-bit DAQ products. Common applications include laboratory research, industrial control and monitoring, and prototype development.
SKU: LJ-U6 -
Ready StockData Acquisition (DAQ)
LabJack U6-Pro – USB Multifunction Data Acquisition with WiFi 24-bit (DAQ)
The U6 family is great for acquiring signals from thermocouples, strain gages, bridge circuits, encoders, and much more. With instrumentation amplified inputs, and software selectable gain settings, the U6 provides a cost effective, USB only method to measure analog signals which can’t be resolved by traditional 12-bit DAQ products. Common applications include laboratory research, industrial control and monitoring, and prototype development.
SKU: LJ-U6PRO
