No products in the cart.
Data Acquisition (DAQ)
LabJack T7-Pro – Ethernet & USB Multifunction Data Acquisition with WiFi 24-bit (DAQ)
Availability:
5 in stock
All the features of the normal T7 with the major addition of WiFi connectivity and an auxiliary low-speed high-resolution (24-bit) sigma-delta ADC. The T7-Pro also includes a real time clock (RTC) and 4GB MicroSD card for standalone datalogging.
With 14 instrumentation amplified analog inputs, software selectable gain settings, dozens of digital I/O features, and a Modbus TCP front-end, the T7 is our most versatile multifunction DAQ platform. Common applications include laboratory research, industrial control and monitoring, automated testing, and prototype development.
Status Barang: Ready
Kondisi: Baru
Minimal Order: 1 pcs
Labjack T7-Pro combines our highest performance 24-bit analog inputs with the convenient Ethernet or WiFi communication interface
What is the difference between the T7-Pro vs. T7?
The T7-Pro has the following additional features:
◆ 802.11b/g WiFi connectivity. (antenna included)
◆ Low-Speed and High-Resolution (24-bit) sigma-delta ADC.
◆ Battery Backed RTC for stand-alone data logging.
◆ Factory Installed 4Gb+ microSD card for stand-alone data logging.
OVERVIEW:
All the features of the normal T7 with the major addition of WiFi connectivity and an auxiliary low-speed high-resolution (24-bit) sigma-delta ADC. Choose the T7 series for ultimate flexibility. With 16-bit to 24-bit analog inputs, the option to use USB, Ethernet, and numerous built-in firmware features, the T7 Series can help you accomplish nearly any data acquisition need.
KEY FEATURES:
◆ 1μV noise-free analog input resolution
◆ Add optional expansion board for 84 analog inputs
◆ 24-bit low-speed and 16-bit high-speed ADC
◆ 23 Digital I/O
◆ 14 Analog Inputs
◆ Watchdog system
◆ Up to 10 counters
◆ Industrial range (-40° to +85°C)
◆ 2 Analog Outputs (12bit 0-5V)
◆ Serial protocols: SPI, I2C
◆ Up to 8 PWM, Quadrature, Pulse Width
◆ Instrumentation amplifier inputs: Single-Ended or Differential It’s great for acquiring signals from virtually any kind of sensor, and can serve that sensor data out through any of its 3 communication interfaces
EACH UNIT INCLUDES WITH:
◆ T7-Pro
◆ USB cable
◆ Ethernet Cable
◆ USB 5V power supply
◆ Screwdriver
◆ WiFi Antenna
| Weight | 1 kg |
|---|
Analog Input
- 14 Analog Inputs built in (16-24 Bits Depending on Speed & Device Type)
- Expand to 84 analog inputs with Mux80 add-on
- T7: 16-bit high-speed ADC (up to 100k samples/s)
- T7-Pro: 24-bit low-speed ADC (resolution as low as 1uV noise-free)
- Software Configurable Resolution Settings
- Single-Ended Inputs (14) or Differential Inputs (7)
- Analog input ranges: ±10V, ±1V, ±0.1V and ±0.01V
- All analog input features are software programmable by configuring the Analog Input Registers
- High speed sampling configurable by using Stream Mode. Speeds up to 100kS/s
- Low Latency Sampling and Control (less than 1ms) is made easy with Command-Response Modbus messages
- Easy integration with sensors like thermocouples, load cells, bridges, and more …
Analog Output
- 2 analog outputs (12-bit, 0-5V)
- Waveform generation via Stream Out
- Integrated LJTick-DAC support for multiple +/-10V outputs
Digital I/O
- 23 Digital I/O
- Supports SPI, I2C, and more… (Master Only)
- 5 PWM Outputs with individual phase control
- 5 Pulse Outputs with configurable number, frequency, and width
- 2 Frequency Inputs returning both frequency and period
- 2 Pulse Width Inputs measuring time spent high and low as well as duty cycle
- 2 Line-to-Line Inputs measuring the time between edges on 2 different lines
- 4 High-Speed Counters
- 6 Software Counters with debounce capabilities
- 3 Pairs of Quadrature Inputs
- Many of these DIO Extended Features share pins and cannot be used at the same time. See the DIO Extended Features section of the T7’s datasheet
Fixed Current Outputs
- 200 µA
- 10 µA
Communication Options
- USB
- Ethernet
- 802.11b/g WiFi (T7-Pro only)
Other Highlights
- Capable of stand-alone operation by running Lua Scripts
- Built-In CJC Temperature Sensor for easy thermocouple temperature readings
- Watchdog system
- Field Upgradable Firmware
- Programmable Startup Defaults
- Industrial temperature range (-40 to +85C)
- For more information please visit the hardware overview section of the T7’s datasheet
What is the difference between the T7-Pro vs. T7?
The T7-Pro has the following additional features:
- 802.11b/g WiFi connectivity. (antenna included)
- Low-Speed and High-Resolution (24-bit) sigma-delta ADC.
- Battery Backed RTC for stand-alone data logging.
- Factory Installed 4Gb+ microSD card for stand-alone data logging.
There are no reviews yet.