No products in the cart.
Adhesive
Kyowa CC-33A – Strain Gage Adhesive / Cement / Lem
Availability:
5 in stock
The Kyowa CC-33A is a high-viscosity cyanoacrylate adhesive designed for reliable bonding of strain gages and sensors used in general stress measurement at normal temperatures. Its quick-curing formulation ensures smooth workability, enabling measurement within approximately one hour after application.
Status Barang: Ready
Kondisi: Baru
Minimal Order: 1 pcs
SPECIFICATIONS:
Type: Instantaneous adhesive cured at normal temperatures
FEATURES:
◆ Suitable for bonding general-purpose gages, such as KFG and KFR, which are used for general stress measurement at normal temperatures of 20 to 80.
◆ Quick curing time and stable bonding of various materials in a wide range of temperature and humidity ranges.
◆ Quick curing ensures smooth bonding works.
◆ Enables measurement in approximately 1hour from bonding.
Curing requirements Apply finger pressure (100 to 300 kPa) for 15 to 60 seconds. Then, leave the gage as it is for 1 hour. The finger pressure application time differs depending on temperature and humidity conditions. The lower the temperature and humidity, the longer the finger pressure application time required.
◆ Operating temperature range: -196 to 120 deg C
◆ Ingredients: 1 type of cyanoacrylate liquid
◆ Content: 2g x 1 tube
MAJOR APPLICABLE MATERIALS:
◆ Metals (Steel, stainless steel, copper, aluminum alloys A1050/A2024, etc.)
◆ Plastics (acrylate, vinyl chloride, nylon, etc.)
◆ Composite materials (CFRP, GFRP, printed board, etc.)
◆ Rubber
MAJOR APPLICABLE GAGES:
◆ KFGS, KFGT, KFR, KFWB, KFWS, KFRP, KFRS, KFP, KSPB, KSN (Excl. E5), KSPH, KSPL, KFL, KFN, KFS, KFF, KCH, KV
EACH UNIT INCLUDES WITH:
◆ CC-33A 1x
| Weight | 0.2 kg |
|---|
Specifications
| Types | Instantaneous adhesive cured at normal temperature |
|---|---|
| Operating Temperature (℃) | -196 to 120 (Regular temperature: 20 to 80) |
| Major Applicable Materials | ・Metals (Steel, stainless steel, copper, aluminum alloys A1050, A2024, etc.) ・Plastics (Acrylate, PVC, nylon, etc.) ・Composite materials (CFRP, GFRP, PCB, etc.) ・Rubber |
| Curing Requirements | Apply finger pressure (100 to 300 kPa) for 15 to 60seconds. (After curing, leave the gage for 1 hour or more.) *The finger pressure application time differs depending on temperature and humidity conditions. The lower the temperature and humidity, the longer the finger pressure application time required. |
| Category | 1 type of cyanoacrylate liquid |
| Capacity | CC-33A：2g×1 |
| Features | • Suitable for bonding general-purpose gages which are used for general stress measurement at normal temperature. • Quick curing ensures smooth bonding workability. • Enables measurement in approximately 1 hour from bonding. |
| Major Applicable Gages | KFGS, KFGT, KFRB, KFWB, KFWS, KFRPB, KFRS, KFP, KSPB, KSNB (Excl. E5), KSPH, KSPLB, KFLB, KFNB, KFSB, KFF, KCH, KV |
There are no reviews yet.