Categories

Manufacturers

Newsletter

https://dutapersada.co.id/468-thickbox_default/satisgeo-kt-6.jpg View full size

SATISGEO KT-6

Magnetic Susceptibility Meter

Magnetic Susceptibility Meter / Kappameter

DISCONTINUED

More details

Call 022 7106162

Add Subtract

APPLICATIONS
Rapid and sensitive measuring of magnetic susceptibility in rock exposures and hand samples or quick scanning of susceptibility of drill cores.

FEATURES:

  • Sensitivity 1 x 10-5 SI units
  • Auto-range
  • Real susceptibility automatic calculated
  • Air cored coil for more accurate data
  • LCD display to read easily in bright sunlight
  • Easy to operate - single push-button
  • Autoscan mode for core analysis
  • Audio indication of relative reading values
  • Data memory - 100 readings
  • 9V battery, typically 150 hr's battery life
  • Output RS-232C
  • Real time and date


DESCRIPTION:
The KT-6 is the state-of-the-art in Magnetic Susceptibility Meters. The field geologist will find it an indispensable tool as it allows fast, easy and accurate analysis of rock samples.
This portable, hand-held unit can be used in the field by geologists to analyse and classify rock types or core samples.
The data can be transmitted via serial channel RS-232 to a computer to immediate evaluation and graphic representation.
The KT-6 has a maximum sensitivity of 1 x 10-5 SI units - 0.8 x 10-6 cgs units. This allows the unit to accurately measure very low level susceptibility for reliable identification of sedimentary rocks and other weakly magnetised minerals. However, the system is fully auto ranging and can measure up to a maximum of 999 x 10-3SI units without operator adjustment. Thus over the entire operational range, the KT-6 delivers highly accurate and reliable data.
Most susceptibility meters use a ferrite cored coil. This restrict the "depth of penetration" to typically 1 - 3 mm. The KT-6 uses an air-cored coil giving much larger depth penetration - 90% of signal is from the first 20 mm. This means that if sample is being measured that has a rough surface, the KT-6 can be relied upon to give an accurate measurement of the rock's magnetite content. This "depth of penetration" also allows more accurate results from all rock types due to the better volume analysis that occurs with this feature.


SPECIFICATIONS:

  • Sensitivity: 1 x 10-5 SI units
  • Auto measuring range: 0.00 - 999 x 10-3 SI units
  • Operating frequency: 10kHz
  • Display: 4 digit Liquid Crystal Data, 13mm high
  • Memory: 100 readings
  • Controls: 2 push buttons - MEASURE & RECALL
  • Power source: 9V standard battery
  • Battery life: typically 150 hr's
  • Size: 65 x 187 mm
  • Weight: less than 0.35 kg (with battery)
  • Operating Temperature: from -10°C to +55°C



STANDARD COMPONENTS

  • Processing unit
  • Transport case
  • Instruction manual
  • Battery
  • Screwdriver
  • Cable
  • Disk with communication SW for WINDOWS

Write your review

SATISGEO KT-6

SATISGEO KT-6

Magnetic Susceptibility Meter / Kappameter

DISCONTINUED

Write your review

2 other products in the same category:

top