LEAPER-56

• Portable mini size. Without socket, only 136mm(L)* 90mm(W)* 20mm(H). You just need to connect with USB cable to
  use. No additional power supply.
• Provide with DUT 75MHz bandwidth and < ±2.5nS signal skew. In addition to the high processing speed, you can verify
  whether the ICs processing frequency meets the specifications.
• Via USB HUB, you can connect multiple LEAPER-56s to do gang programming. It makes development and mass production proficient.
• Provide with DUT device pin checking and memory components ID verification. Ensure the best yield rate of processing.

LEAPER-56 is most suitable on the mobile environment.
The best way to perform your professional capacity and working efficiency.

 

LEAPER-56 supports the operating systems

• Windows 7 / Vista / XP (32 &64 bits)

Specification

• Device power signal
• Logic signal level: 1.5V~6.0V,10mV
• IOL, IOH current: 10mA
• Logic signal frequency: 75MHz (3-5V), 60MHz (2.5V), 45MHz (1.8V), 25MHz (1.5V)
• Signal skew: <±2.5nS (3-5V)
• Clock frequency: 0Hz ~ 75MHz
• VDD, VIO level: 1.5V~6.5V,10mV
• IDD, IIO frequency: 400mA
• VPP, VHH level: 1.5V~15.5V,20mV
• IPP, IHH frequency: 150mA
• Power consumption: 4W
• Pin drivers: 48 Pin Uuiversal Pin Driver (Zero Inser ion Force)
• DUT socket: DIP 48 ZIF
• Dimension: 136(L) x 90(W) x 20(H) mm, Socket is not induded
• Weight: 282g

PC System Requirements

• Operating system: Win 7 / Vista / XP (32bits & 64bits)
• Processor: Pentium 4 above
• Memory: 1GB RAM above
• Hard disk: 500 MB above / buffer: 1GB above
• Communication: USB 2.0 high speed
• USB powere: Connect the cable with 2 USB port (600mA above)

Supported Devices

• NOR FLASH, SPI, EPROM, EEPROM, MPU, MCU, CPLD, NV-RAM, etc.

Supported File Formats

• Binary/Machine Code, Intel HEX,TEK HEX, Motorola HEX

Remarks

• Must use the USB cable from the standard package, and connect to the USB ports behind your PC. Besides please also connect it with 2 USB ports, or through the USB Hub (5V/1A)
• When you need adapters to process the high-speed components, be sure to use good quality adapters. In order to have the best high-frequency process performance, the socket and DUT must keep good contact.

 

Standard Accessories

• Main unit x 1
• Y-USB cable x1
• CD (Included driver and user's manual)
• Soft case

 

Optional Accessories

• PLCC, JLCC, SDIP, SOP, VSOP, SSOP, TSOP, TSSOP, QFP, PQFP, TQFP, VQFP, BGA, uBGA, SON, WSON, QFN (MLF)... .etc.

 

The software installation notice:

The LEAPER-56 software includes: 

1. PC Software

2. Database patch

Please install the software first, then the database patch.