View full size Measurement at High-temperatures
Uniaxial, 2-element, temperature-compensation type
Resistance : 120Ω, Gage factor (750°C) : Approx. 1.2, Material : Inconel 600 (NCF 600)
Installation Method and Operating Temperature Range
Spot welding : 25 to 750°C
Call 022 7106162
| Model | KHCR-5-120-G16-11 C2MV for common steel |
| KHCR-5-120-G16-13 C2MV for Inconel (equivalent to JIS NCF600) | |
| KHCR-5-120-G16-16 C2MV for stainless steel | |
| Gage type | Uniaxial 2-element temperature-compensation type |
| Resistive element | Heat-resistant special alloy |
| Sensing part | Gage length: 5 mm |
| Flange: 3(W)×10(L) mm, t = 0.1mm | |
| Sheath tube and flange: Inconel 600( equivalent to JIS NCF600 ) | |
| Gage resistance | Approx. 120Ω |
| Lead wire cable | MI cable: Inconel 600-sheathed 3 Ni-conductor cable, 1.0m diameter by approx. 2 m long (std.) |
| Soft cable: ETFE-coated 3-conductor shielded cable, 1.7m diameter by approx. 50 cm long | |
| Max. operating temp. | Approx. 750°C |
| Applicable linear expansion coefficient | 11, 13, 16×10 -6 /°C |
| Gage factor (sensing part only) | Approx. 1.5 at room temperature |
| Approx. 1.2 at 750°C | |
| Thermally-induced app. strain | The estimated curve is shown in the test data sheet. |
| Temp. comp. range | 25°C to 750°C |
| Operating temperature range | 25°C to 750°C |
| Drift | Within ±20 μm/m /h(750°C) |
| Strain limit | ±10000 μm/m at 750°C |
| Fatigue life | 1×10 6 times at 750°C(with strain level ±500 μm/m) |
| Max. allowable current | 50 mA |
| Min. mountable curvature radius | 15 mm |
| Mounting Method | Spot welding |
| *Model with no bridge adapter is also available. | |
Website kami saat ini dalam proses pengembangan sehingga ada beberpa produk yang belum bisa kami tampilkan, untuk informasi anda bisa contact kami langsung ke no. Tel +62 (22) 7106162, atau anda bisa melakukan live chat dengan customer service kami.
©2009 DUTA PERSADA INSTRUMENTS
Digital Oscilloscope
