KYOWA KCH

The unique design simplifies gage bonding, wiring and moisture-proofing work in the field. In addition, the metal case protects the strain gage and significantly improves reliability compared with conventional gages. Using stud bolts and adhesive, the gages can be mounted to the bottom and side plate of tank for strain measurement, to a hopper or tank for weight measurement, to the shaft of a truck for tare weight measurement or in any similar applications where the gages need to be protected against moisture, water or small stones. (Patented)

PDF download

Applicable Adhesives and Operating Temperature Range after Curing

Model	KCH-5A-B KCH-5A-BJ	KCH-5A-S KCH-5A-SJ	KCH-5A-1	KCH-5A-2	KCH-5A-3
Type	Bridge (for bending)	Bridge (for bending)	Uniaxial	Biaxial, 0/90 stacked rosette	Triaxial, 0/90/45 stacked roset
Gage Length	2mm	2mm	5mm	5mm	5mm
Resis tance	350Ω	350Ω	350Ω	350Ω	350Ω
Gage Pattern
System	4wire system	4wire system	3wire system	3wire system	2wire system
Cable	KCH-5A-B and S come with4gage system special flexible vinyl-shielded 4-conductor (0.3 mm2) cable, 6.8-mm diameter by 10-m long, and bared at the tip; KCH-5A-BJ and SJ, with flexible vinyl-shielded 4-conductor (0.3 mm 2) cable, 2 m long (cable cover 1.75 m long) by 6.3 mm diameter (that of cable cover 10.2 mm) and terminated with waterproof connector plug (R04-P6-M6.8). Relay cables TN-29 to 33 are separately sold.		Comes with special flexible vinyl-shielded 4-conductor (0.3 mm2) cable, 6.8 mm diameter by 10 m long, ansds	h special flexible vinyl-shielded 6-conductor (0.3 mm2) cable, 6.8 mm diameter by 10 m long and bared at the tip.

Relay Cables (for KCH-5A-BJ/SJ) (Option)