Newsletter View full size


Data Recorders / Analyzers (EDX series)


Universal Recorders

Compact Design and Easy LAN/USB Connection

More details

Call 022 7106162

Add Subtract

Compact and Iightweight, up to 128 channels measurement
Available with 1, 2 or 4 slots, the EDX-100A is a universal recorder that enables flexible configuration and free arrangement while ensuring multiple functions. The wide application range extends from small-scale measurement of 8 channels to large-scale measurement of up to 128 channels by connecting 4 units of the EDX-100A.For PC connection, LAN and USB ports are provided. The LAN port enables the PC to control up to 4 units of EDX-100A, while the USB port ensures easy connection between the EDX-100A and the PC.In addition, the EDX-100A can be operated as a stand-alone unit with no PC connected. A compact flash memory card enables condition setting and data collection.To respond to the need for a wide variety of measurements, 6 different types of conditioner cards are available.


  • Compact and lightweight
  • Available with 1, 2 and 4 slots
  • LAN port for establishing multichannel network (max. 128 channels)
  • USB port for easy connection to the PC
  • Operable as a stand-alone unit
  • High-speed sampling at 100 kHz (10 kHz for 16-channel measurement)
  • CAN data acquisition possible with CAN-40A/41A conditioner card mounted
  • Various conditioner cards available
  • TEDS compatible
  • Voice memo can be recorded by using an optional dedicated remote control unit.
  • Dynamic data acquisition software DCS-100A is included in standard accessories.
  • Measured data is saved in KYOWA standard KS2 format and can be analyzed with optional data analysis software DAS-100A.
  • Operates on 10 to 18 VDC.
    ※For the data analysis software DAS-100A. 

PDF download




ModelCard SlotsMax. Number of Analog Input ChannelsRemark
EDX-100A-1H18With handle grip


Number of Input Channels Refer to table above.
Analog InputProvided by optional conditioner cards (common to EDX-2000A).
 For the conditioner cards,
refer to  here
CAN Data InputPovided by the optional CAN-40A or CAN-41A
Voice Memo Input1 channel. 
An optional dedicated remote control unit RCU-41A enables recording of voice memo during measurement in manual mode.
Reproduction of recorded voice memo requires an optional data analysis software DAS-100A.
Sampling MethodSimultaneous sampling of all channels
Sampling Frequency Selection Systems

1-2-5 sysem in a range of 1 Hz to 100 kHz

2 n system in a range of 2 Hz to 65536 Hz

Sampling Frequency (1-2-5 system)1 Hz to 100 kHz for 1-channel measurement
1 Hz to 50 kHz for 3-channel measurement
1 Hz to 20 kHz for 8-channel measurement
1 Hz to 10 kHz for 16-channel measurement
1 Hz to 5 kHz for 32-channel measurement
1 Hz to 1 kHz for CAN data measurement
Data StorageCompact flash memory card
(128 MB to 8 GB; 45x speed or higher)
Up to 2 GB data for 1 time of measurement
Setting ConditionsOnline : From the PC through LAN or USB port
Offline : By reading from the CF card which has measuring conditions written with the DCS-100A data acquisition software
Saving ConditionsAmplifier setting conditions and measuring conditions are saved in the internal nonvolatile memory, enabling immediate setup with previous conditions upon power-on.
Measurement Modes
ManualData recording is manually started/stopped or stopped when data is recorded to a preset number of measured data.
Manual mode allows recording of voice memo during data recording.
TriggerData recording is automatically started when the preset trigger condition is satisfied. 
Note that any CAN data cannot be used as the trigger condition.
IntervalData recording is periodically made at preset intervals.
Manual Start/Stop of Data RecordingPossible through the PC or by pressing the switch on the front panel or from the dedicated remote control unit
Balance AdjustmentStrain input channels can be balanced by pressing the BAL.
switch on the front panel or from the dedicated remote control unit or through the PC.
Saved Data FormatKYOWA standard format KS2, which enables data analysis
with the optional data analysis software DAS-100A
Collecting DataLAN or USB port enables online data transfer to the PC,
while CF card enables offline data transfer.
TEDS FunctionUsable when the EDX-100A is under the online control of the PC. Compatible conditioner cards are CDV-40B(-F),DPM-42A(-F) and CCA-40A(-F). The suffix F denotes that the card is equipped with 8th order Butterworth antialiasing filter.
Synchronous OperationSynchronous cable enables cascade connection of up to 4 units of the EDX-100A.
While data is recorded as a separate file in the CF card inserted into each unit, files of all cards can be combined into a singlefile after online or offline data transfer to the PC.
Analog OutputExcept for CDV-40B(-F) and CAN-40A, conditioner cards provide an analog output connector, enabling voltage monitoring (5 V FS).
CF Card Slot1 (for data recording and condition setting)
Communication PortsLAN and USB (for control and data transfer), switchable
LAN I/F10BASE-T/100BASE-TX Connector: 
RJ45 modular jack
USB I/FConforms to USB 2.0 (high speed).
Connector: Series B receptacle
Operation SwitchesREC/PAUSE : Start/pause data recording.
STOP : Stop data recording.
BAL. : Execute balance adjustment.
BAL. : Execute balance adjustment.
ID : Set ID No. of EDX-100A.
LAN/USB : Switch communication port.
IndicatorsOperation status indicator LEDs: 7
Channel status indicator LEDs: The number corresponds to the number of channels provided.
External Control ConnectorsCONT IN and CONT OUT(for remote control and synchronous operation)
Operating Temperature Range0 to 50℃
Operating Humidity Range20 to 90% RH (noncondensing)
Storage Temperature Range-20 to 60℃
Vibration Resistance29.42 m/s 2 (3 G), 5 to 55 Hz (when operating)
49.03 m/s 2 (5 G), 5 to 55 Hz (when not operating)
Shock Resistance196.1 m/s 2 (20 G)/11 ms
EMC StandardsIEC61326-1 Class A)
Safety standardsIEC61010-1 (set certificate Ⅱ, pollution degree 2)
Power Supply10 to 18 VDC
Connector: RM12BRD-4PH (Hirose)
DC power supply or optional dedicated AC adapter is required.
Current ConsumptionEDX-100A-1: Approx. 1.2 A (when operated on 12 VDC with 1 CDV-40B card mounted and full load applied)
EDX-100A-2: Approx. 1.8 A (when operated on 12 VDC with EDX-100A-2: Approx. 1.8 A (when operated on 12 VDC with
EDX-100A-4 Approx. 2.8 A (when operated on 12 VDC with 4 CDV-40B cards mounted and full load applied)
DimensionsEDX-100A-1: 70.0(W) x 132.5(H) x 255(D) mm
EDX-100A-2: 92.5(W) x 132.5(H) x 255(D) mm
EDX-100A-4: 137.5(W) x 132.5 (H) x 255(D) mm
excluding protrusions
Weight, ApproxEDX-100A-1: 1.6 kg (1.7 kg with 1 CDV-40B card mounted)
EDX-100A-2: 1.8 kg (2.0 kg with 2 CDV-40B cards mounted)
EDX-100A-4: 2.0 kg (2.6 kg with 4 CDV-40B cards mounted)

Standard Accessory

Power cable P-57,USB cable N-38

Dynamic Data Acquisition Software DCS-100A

CF card

Optional Accessories

USB cable (N-39) 2 m long
Synchronous cable N-95 2 m long
AC adapter UIA 345-12
Input: 100 to 240 VAC, 50/60 Hz, 1.2 A
Output: 2 VDC, 3.8 A

Dummy panel EDX-DUMMY


Remote Control Unit

Control ButtonsRCU-41A
 (1) REC/PAUSE : Start/pause data recording.
(2) STOP : Stop data recording.
(3) BAL. : Execute balance adjustment.
(4) VOICE MEMO : Record voice memo.
Cable1.5 m long
 (to be connected to CONT IN connector of EDX-100A
Dimensions35(W) x 110(H) x 20(D) mm (excluding protrusions)
WeightApprox. 200g

Write your review




Universal Recorders

Compact Design and Easy LAN/USB Connection

Write your review

4 other products in the same category: