Manufacturers

UCAM-500B

Data Loggers

Fast Data Logger

KYOWA UCAM-500B

Can Measure Quasi-Dynamic Phenomena

Call 022 7106162

More info
Comments

Maximum 1000 measuring channels.Flexibly coping with small to large scale measurement
The UCAM-500B is a fast data logger system which can simultaneously sample variables at multiple points at a maximum rate of 50 times per second. The system is composed of fast data logger scanner(s) USB-500A, the fast data logger controller UCAM-500B which records measured data at high speed, and a PC in which the control software UCS-60B is installed for setting, controlling and data collection. The scanner and controller are black boxes having no operating switches and controls.Scanning speeds include 1 time per second for 1000 channels and 50 times per second for 100 channels, making the system applicable for measurement of static to quasi-dynamic phenomena. In addition, the strain unit, voltage unit and temperature unit can be mounted to the scanner, enabling the system to connect to strain gages, strain gage transducers, potentiometer sensors, voltage-output instruments and thermocouples. The scanner provides a maximum 50 channels and the controller can connect to a maximum 20 scanners, enabling the system to measure variables at a maximum 1000 points.Signals from sensors are digitized by A-D converters in the scanner, and then transferred to the controller via the dedicated interface. The controller stores the data in a built-in semiconductor memory and whenever commanded from the PC, the controller transfers the data to the PC. Since control commands of the controller are disclosed, users can create their original software to configure the optimum system for a specific measuring purpose.

Features

Simultaneous sampling of all channels, ensuring simultaneity of data
Applicable for measurement of static to quasi-dynamic phenomena changing at several Hz
High-speed semiconductor memory ensuring long-term data logging
Intrinsic functions for data processing such as rosette analysis
All operations from PC
Compatible with varieties of sensors

Note : For LAN connecion, use a LAN hub and straight cable.

PDF download

UCAM-500B (443.61 kB)

Specifications

Controller

■Fast Data Logger Controller UCAM-500B

Number of Connectable Scanners (USB-500A)

1 to 20 (maximum 1000 channels)

Functions

Receives data from scanner

and stores it in memory.

Transfers data to PC.

Measuring Modes

Real-time

interval

trigger

monitor

Measurement Functions

initial, original, measure

Initial Value Memory Range

Same as measuring range of scanner

Conversion to Physical Quantities into Engineering Units

Through multiplication of measured values (strain, voltage,potentiometer signals) by preset coefficients. (For details, refer to specifications of the control software.)

Memory

64 MB (backed for approx. 4 years at 20℃)

Measured data is stored in this semiconductor memory but

parameters of calculation channels cannot be stored.

Maximm Number of Storing Times

Number of Channels	Max. Number of Storing Times(Approx.)
50	120000
100	60000
200	30000
300	20000
400	15000
500	12000
600	10000
700	8500
800	7500
900	6500
1000	6000

nterfaces

Dedicated interface between controller and scanner

Total extensible length up to 185 m

LAN interface between controller and PC

（10BASE-T/100BASE-TX）

Real-time Clock

Year, month, day, hour, minute, second

(used for interval measurement, etc.; backed for approx. 8 years at 20℃)

Operating Temperature/Humidity Range

0 to 40℃, 20 to 85%

RH (noncondensing)

Power Supply

AC85 to 264V, 50/60 Hz, approx. 50 VA

Dimensions

426(W) x 88(H) x 300(D) mm (excluding protrusions)

Weight

Approx. 6 kg

Standard Accessories

Control software UCS-60B (CD-R)

AC power cable P-18 (with conversion adapter CM-33)

Synchronous cable US-50A 2 m long

T-type BNC connector, BNC terminator, Grounding conductor,

Spare fuse (in fuse holder), Instruction manual

The following are optional dedicated accessories.

Scanner

USB-500A

Applicable Sensors and Measuring Units

Measuring Unit Applicable Sensors			Strain UnitUSS-51A	Voltage UnitUSV-51A	Thermocouple UnitUST-51A
Strain gage Strain gage transducer	1-gagemethod	120Ω	●
	1-gagemethod	350Ω	●
	1-gagemethod (true-dummy)	120Ω	●
	1-gagemethod (true-dummy)	350Ω	●
	2-gage method 120 to 1000Ω	Active-dummy	●
	2-gage method 120 to 1000Ω	Active-active	●
	4-gage method 120 to 1000Ω	Opposite side active	●
	4-gage method 120 to 1000Ω	Full-bridge	●
Potentiometer sensor		1 to10ｋΩ	●
Voltage-output sensor		±20.0V		●
Thermocouple		K（CA）			●
		T（CC）			●
		E（CRC）			●
		J（IC）			●
		R			●

Number of Measuring Channels

(with 5 measuring units mounted, 10 channels per unit)

Data Update

Data Update	Number of Measuring Channels	Number of Scanners
1 time/sec	1 to 1000	1 to 20台
2 times/sec	1 to 500	1 to 10台
10 times/sec	1 to 200	1 to 4台
20 times/sec	1 to 200	1 to 4台
50 times/sec	1 to 100	1 to 2台

To update data at 10 times/sec, 20 times/sec or 50 times/sec, scanners should be connected with each other using synchronous cable US-50A.

Frequency Response Range

DC to 7.8 Hz (deviation 0.5 dB/ 3.5 dB)

Interface	Dedicated interface between controller and scanner and between each scanner
	Dedicated interface cable 2 m long (provided standard foreach scanner),
	total extensible length up to 185 m
Operating Temperature/Humidity Range	0 to 40℃,
Operating Temperature/Humidity Range	20 to 85% RH (noncondensing)
Power Supply	AC85 to 264V, 50/60 Hz, approx. 50 VA
Dimensions	426(W) x 133(H) x 300(D) mm (excluding protrusions)
Weight	Approx. 6.5 kg (with 5 USS-51A strain units mounted)

Standard Accessories

AC power cable P-18 (1.8 m long with conversion adapter CM-33)

Dedicated interface cable 2 m long, T-type BNC connector,

Grounding conductor, Spare fuse (in fuse holder)

Strain Unit

USS-51A
Number of Measuring Channels	10
Applicable Sensors	Strain gages, strain gage transducers,potentiometer sensors
Bridge Excitation	2 VDC, constant voltage (regularly applied)
Potentiometer Supply	2 VDC, constant voltge (regularly applied)
Gage Factor	2.00 fixed (conversion to engineering unit function enables correction with 2.00/Ks)

Signal	Range Mode	Measuring Range	Resolution	Accuracy
Strain	Ｌ	0 to ±19000μm/m	1 μm/m	±0.05％FS
Strain	Ｈ	0 to ±200000μm/m	10 μm/m	±0.05％FS
Potentiometer Sensor		0 to ±50％	0.01％	±0.1％FS

With static (DC) signal input

Note : The stated measuring ranges are for INITIAL or ORIGINAL measurement mode. In MEASURE mode, the range is the result obtained by subtracting the pre-measured initial value from the original value.
●USS-51A M1 for transducers with NDIS connector

●USS-51A M6 with one-touch clamp style terminal board

Voltage Unit

USV-51A
Number of Measuring Channels	10
Applicable Sensors	DC voltage, voltage-output sensor

Measuring Range	Resolution	Accuracy	Signal Source Resistance
Measuring Range	1ｍV	±0.05％FS	50 Ω or less

With static (DC) signal input

Thermocouple Unit

UST-51A
Number of Measuring Channels	10
Applicable Sensors	Thermocouples

Type	Range Mode	Measuring Range	Resolution	Accuracy
K	Ｌ	－200.0 to 437.0℃	0.1℃	±0.8℃
K	Ｈ	－200.0 to 1200.0℃	0.1℃	±2.8℃
T	―	－200.0 to 350.0℃	0.1℃	±0.7℃
E	Ｌ	－200.0 to 260.0℃	0.1℃	±0.5℃
E	Ｈ	－200.0 to 800.0℃	0.1℃	±1.7℃
J	Ｌ	0 to 330.0℃	0.1℃	±0.3℃
J	Ｈ	0 to 750.0℃	0.1℃	±1.9℃
Ｒ	―	0 to 1600.0℃	0.2℃	±2.2℃

With static (DC) signal input

Note: The stated accuracies do not include the internal reference junction accuracy. The internal reference junction compensator accuracy is ±0.5℃ (with input terminal temperature balanced at 25℃ ±10℃).

Reference junction compensator is switchable between internal and external.

For thermocouple resistance 300Ω or less (K type), contact us.

Terminal Cover

UT-50A
This dustproof cover protects the input terminals of the measuring unit.
It is included in standard accessories to the thermocouple unit UST-51A.

Rack-Mounting Brackets

JIS rack-mounting bracket UR-50A for UCAM-500B

EIA rack-mounting bracket UR-51A for UCAM-500B

JIS rack-mounting bracket UR-52A for USB-500A

EIA rack-mounting bracket UR-53A for USB-500A

Rack/drawer-mounting bracket UR-54A for USB-500A

Synchronous Cable

US-50A

Required for data update at 10 times per second or more with 2 to 4 scanners. One each synchronous cable is provided standard for each scanner. 1 synchronous cable is required to operate 3 scanners in synchronizaton, and 2 synchronous cables are required to operate 4 scanners in synchronization.

Connection Cables

U-17～20

Dummy Panel UD-50A

UD-50A

To cover the portion of USB-500A to which no measuring unit is mounted.

Isolation Transformer

UPT-300B

Use this isolation transformer to obtain good measurement resultswhere adverse power environment may cause noise, etc.

One-Touch Terminal Board

JT-1A

Mounted to the input terminal of the measuring unit, the JT-1A enables quick fitting of the input leadwire cable. It will be used for one each leadwire cable. (10 pieces per pack)

Control Software

UCS-60B

Standard accessory to the UCAM-500B. For details,refer to here

Be the first to write your review !

4 other products in the same category:

< >

Customer Care

< >

Lorem ipsum dolor

Lastest New

icon

Website kami saat ini dalam proses pengembangan sehingga ada beberpa produk yang belum bisa kami tampilkan, untuk informasi anda bisa contact kami langsung ke no. Tel +62 (22) 7106162, atau anda bisa melakukan live chat dengan customer service kami.

Jl. Jendral Ahmad Yani 221-223 - Ruko Segitiga Mas Kosambi Block B16. Bandung 40113, INDONESIA -Telegram: @dutapersada2
Tel : +62 (22) 7106162
Email : info @ dutapersada.co.id